3-10
BIOS Setup
▍
duct transactions for a longer time and thus improve the effective
PCI bandwidth. For better PCI performance, you should set the item
to higher values.
Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the op-
erating system that does not support or have any USB 1.1/2.0 driver
installed, such as DOS and SCO Unix.
Audio Controller
This setting enables/disables the onboard audio controller.
Launch PXE OpROM
This setting enables/disables the initialization of the onboard LAN
Boot ROM during bootup. Selecting [Disabled] will speed up the boot
process.
GPIO Conguration
GPO0~3 Data
This setting controls the operation mode of the specied GPIO.
▶
▶
▶
▶
▶
To Next Page
Loading...
