MSI Optix AG32C - Page 24

PB
OSD Setup
2-8
h Setting
1st Level Menu 2nd Level Menu Description
Language 繁體中文 ■ Language factory default is English�
■ Users have to press the Middle Button to con󰘰rm
and apply the Language setting�
■ Language is an independent setting� Users’ own
language setting will override the factory default�
When users set Reset to Yes, Language will not
be changed�
English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
ไทย
Bahasa Indonesia
󰬁
Türkçe
(More languages
coming soon)
Transparency 0~5 Users can adjust Transparency in any Mode�
OSD Time Out 5~30 Users can adjust OSD Time Out in any Mode�
LED
(OFF)
■ Users can adjust LED to ON or OFF�
■ Default is ON�
■ Optix AG32C supported�
(ON)
Power Button OFF ■ When pressing the power button over 5 seconds,
the monitor will be turned o󰘯�
■ Users can set the power status when the monitor
is o󰘯 .
■ Set to OFF, the monitor will be turned o󰘯 totally.
■ Set to Standby, only panel and backlight are
o󰘯, but the monitor still can be activated by OS
detection, avoiding desk-top icon and screen be
refreshed�
Standby
Information on
Screen
(OFF)
■ The information of the monitor status will be
showed on the right side of the screen�
■ Users can enable or disable the Information on
Screen� Default is OFF�
(ON)
Reset YES Users can Reset and restore settings to original OSD
Default in any Mode�
NO