To Next Page

To Previous Page

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.

∙ All cautions and warnings on the device or user’s manual should be noted.

∙ Refer servicing to qualified personnel only.

∙ Keep the User’s Guide that comes with the package for future reference.

∙ To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙ Lay this device on a reliable flat surface before setting it up.

∙ Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

Do not disable the protective earth pin from the plug. The device must be connected

to an earthed mains socket-outlet.

∙ Always disconnect the power cord or switch the wall socket off if the device would be

left unused for a certain time to achieve zero energy consumption.

∙ The ventilator on the device is used for air convection and to prevent the device from

overheating. Do not cover the ventilator.

∙ Do not leave the device in an unconditioned environment with a storage temperature

above60℃orbelow-20℃,whichmaydamagethedevice.

∙ NOTE:Themaximumoperatingtemperatureisaround40℃.

∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into

the opening; that could damage the device or cause electric shock.

∙ Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙ Always keep strong magnetic or electrical objects away from the device.

∙ If any of the following situations arises, get the device checked by service personnel:

•The power cord or plug is damaged.

•Liquid has penetrated into the device.

•The device has been exposed to moisture.

•The device does not work well or you can not get it work according to user’s

manual.

•The device has dropped and damaged.

•The device has obvious sign of breakage.

∙ To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed

object with a anti-tip fastener that helps to properly support the monitor and keep it

safe in place.

⚠

Important

Please confirm the power distribution system in the installation site shall provide the

circuit breaker rated 120/240V, 20A (maximum).

Questions and Answers:

Need help?

Do you have a question about the MSI Optix G27C7 and is the answer not in the manual?

MSI Optix G27C7 Specifications

General

Panel type	VA
Pixel pitch	0.3108 x 0.3108 mm
Display diagonal	27 \
Anti-glare screen	Yes
Display technology	LED
Native aspect ratio	16:9
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	118 %
Contrast ratio (dynamic)	100000000:1
Contrast ratio (typical)	3000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	596.76 mm
Digital vertical frequency	30 - 165 Hz
Digital horizontal frequency	104 - 186.8 kHz
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
NVIDIA G-SYNC	-
DisplayPort version	1.4
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Input current	s A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Package depth	166 mm
Package width	696 mm
Package height	463 mm
Package weight	7000 g
Product color	Black
Market positioning	Gaming
Harmonized System (HS) code	85285210