3-13
BIOS Setup
▍
MS-7586
Power LED
When ACPI Standby State s set to [S3], ths tem wll avalable. Ths tem congures
how the system uses power LED on the case to ndcate the sleep/suspend state. Aval
-
able optons are:
[Sngle] The power LED turns o durng the sleep/suspend mode.
[Dual] The power LED changes ts color to ndcate the sleep/suspend
state.
[Blnkng] The power LED blnks to ndcate the sleep/suspend state.
Restore On AC Power Loss
Ths tem speces whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[O] Always leaves the computer n the power o state.
[On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
Wake up Event By
Settng to [BIOS] actvates the followng elds, and use the followng elds to set the
wake up events. Settng to [OS], the wake up events wll be dened by OS.
Resume From S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume From S3 By PS/2 Keyboard / Mouse
These tems determne whether the system wll be awakened from what power sav
-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
Hot Key
When the Rusume From S3 By PS/2 Keyboard s set to [Hot Key], ths tem wll aval
-
able. Ths tem allows you to set the hot key to resume from keyboard.
Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
▶
▶
▶
▶
▶
▶
▶
▶
To Next Page
Loading...
Need help?
General
