MSI P55-CD45 series - Page 141

JMcron RAID Introducton ▍
MS-7586
D-9
JMcron RAID Introducton ▍
MS-7586
Solvng a Mrror Con󰘱ct
A Mrror con󰘱ct occurs when both dsks n a RAID 1 (Mrror) con󰘰guraton are un-
plugged from the system n turn, then plugged n agan. Snce both dsks contan exactly
the same data, the system wll be unable to determne whch of the two s the source
drve. Ths opton allows you to set the source drve and rebuld the Mrror drve accord-
ng to the contents of the source drve.
To solvng a Mrror con󰘱ct:
Select “Solvng a Mrror Con󰘱ct” and press <Enter>. In the Hard Dsk Drver Lst menu
use <Space> key to select the dsks you want to set as source drve. Usng the <TAB>,
move to the RAID Dsk Drve Lst menu and hghlght the RAID set that you want to
rebuld. Press <Del> to begn rebuldng the Mrror con󰘰guraton.
A status bar at the bottom of the screen shows the progress of the rebuldng.