MSI P55 GD80 - Motherboard - ATX - Page 111

Control Center ▍
MS-7581
B-9
Control Center ▍
MS-7581
LED
In the LED menu, you can turn on/ turn o󰘯 the onboard LEDs by clckng each botton.
You can clck the “Save” button to save the adjustment. You can clck on any MOSFET
button to change menu from LED to MOSFET Temp.
clck these buttons to turn
on/ turn o󰘯 the LEDs.
MOSFET buttons.
Important
Every tme you turn-o󰘯 the system, the settngs wll be restored to the factory default. If
you want to use the saved settngs, you have to load t every tme by clckng the “Load”
button.
▶