MSI P55 GD80 - Motherboard - ATX - Button

2-20
Hardware Setup ▍
MS-7581
Hardware Setup ▍
MS-7581
button
The motherboard provdes the followng buttons for you to set the computer’s functon.
Ths secton wll explan how to change your motherboard’s functon through the use
of button.
Clear CMOS Button: CLR_CMOS1
There s a CMOS RAM on board that has a power supply from external battery to keep
the system con󰘰guraton data. Wth the CMOS RAM, the system can automatcally
boot OS every tme t s turned on. If you want to clear the system con󰘰guraton, use
the button to clear data. Press the button to clear the data.
Important
Make sure that you power o󰘯 the system before clearng CMOS data.
After pressng ths button to clear CMOS data n power o󰘯 (G3) state, the system wll
boot automatcally.
OC Gene Button: OC Gene
Ths button s used to auto-overclock for the system. Press ths button to enable the
OC Gene functon when the system s n power o󰘯 state, meanwhle, the button wll
lght and lock. And then the system wll automatcally detect the optmum values to
overclock after bootng the system. To dsable the OC Gene functon, please press the
button agan after power o󰘯 the system, meanwhle, the button lght wll o󰘯 and unlock,
and the system wll restore the default for next boot.
Important
Please nstall the DDR3 1333 and up memory and equp better heat snk/ cooler wth
OC Gene functon.
We do not guarantee the OC Gene overclockng range and the damages or rsks
caused by the OC Gene overclockng behavor.
You can dsable the OC Gene functon n BIOS setup. And we suggest you to save the
OC Gene con󰘰guraton to overclockng pro󰘰le n BIOS for future usng.