MSI X299 PRO - Network, SATA, M.2, and Audio Configurations; USB and Thunderbolt Configurations

54
BIOS Setup
▶ Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
▶ Ipv4 PXE Support [Enabled]
When Enabled, the system UEFI network stack will support Ipv4 protocol. This item
will appear when Network Stack is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
▶ Ipv6 PXE Support [Enabled]
When Enabled, the system UEFI network stack will support Ipv6 protocol. This item
will appear when Network Stack is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
▶ SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI
(Advanced Host Controller Interface) o󽙋ers some
advanced features to enhance the speed and performance
of SATA storage device, such as Native Command Queuing
(NCQ) and hot-plugging.
[Optane Mode] Enables Optane function for NVMe or PCIe storage
devices.
▶ M2_X-RST Pcie Storage Remapping [Disabled]
Enables or disables M.2 PCIe storage remapping for Intel Rapid Storage.
▶ M.2/Optane Genie [Disabled]
Enables or disables M.2 storage/ Optane memory.
▶ SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
▶ HD Audio Controller [Enabled]
Enables or disables the onboard High Denition Audio controller.
▶ Thunderbolt(TM) Conguration
▶ Discrete Thunderbolt(TM) Support [Disabled]
Enables or disables Thunderbolt™ support.
▶ USB Conguration
Sets the onboard USB controller and device function. Press Enter to enter the sub-
menu.
▶ USB Controller [Enabled]
Enables or disables all USB controller.