MSI X99A RAIDER

Chapter 1
1-10
Getting Started
Back Panel Quick Guide
󰁈PS/2 Port
A PS/2
®
DIN connector is for a PS/2
®
mouse/keyboard.
󰁈Clear CMOS Button
There is CMOS RAM present on board that is powered by an external battery to store
󰘰
the operating system (OS) every time it is turned on. If you wish to clear the system
󰘰
󰁈USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other
USB 2.0-compatible devices.
󰁈

rate up to 5 Gbit/s (SuperSpeed).
󰁈

transfer rate up to 10 Gb/s (SuperSpeed USB 10 Gbps).
Important


Optical
S/PDIF-Out
Line-In/ SS-Out
Line-Out
RS-Out
CS-Out

Clear
CMOS
Button
LAN Port
PS/2 Port
USB 2.0 Port 
USB 2.0 Port
MIC