MSI X99A RAIDER

Chapter 1
1-28
Getting Started
JUSB2: USB 2.0 Expansion Connector
This connector is designed for connecting high-speed USB peripherals such as USB

1.VC
C
3.USB0
-
10.NC
5.USB0+
7.Ground
9.No Pi
n
8.Ground
6.USB1+
4.USB1-
2.VC
C
Important
Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
JCI1: Chassis Intrusion Connector
This connector connects to the chassis intrusion switch cable. If the computer case is
opened, the chassis intrusion mechanism will be activated. The system will record this
󰘱
enter the BIOS utility and clear the record.
2
.
C
I
N
T
R
U
1
.
G
r
o
u
n
d