41
BIOS Setup
Dynamic Frequency Search Step (MHz) [Auto]
Sets a increment/ value for each step of base clock optimization. If set to Auto,
Dynamic Frequency Search is enabled.
BCLK Amplitude [Auto]
get higher overclocking values.
BCLK Slew Rate [Auto]
depending on the actual overclocking scenario.
BCLK ORT Duration [Auto]
depending on the actual overclocking scenario.
This item will be available when the memory modules that support X.M.P. is installed.
[Disabled] Disables this function.
[Profile 1] Uses profile1 settings of XMP memory module.
[Profile 2] Uses profile2 settings of XMP memory module.
DRAM Reference Clock [Auto]*
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory
preset.
DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link] Allows user to configure the DRAM timing for all memory channel.
[UnLink] Allows user to configure the DRAM timing for respective memory
channel.
Press <Enter> to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
To Next Page
Loading...
