69
BIOS Setup
fDRAM Phase Control [Auto]
Controls memory phase according to the DRAM loading. If set to Auto, BIOS will
optimize the DRAM PWM phase automatically.
[Auto] This setting will be configured automatically by BIOS.
[Optimized] Sets the optimum power phase profile.
[Disabled] Disables the PWM power phase switching feature.
fDRAM Over Voltage Protection [Auto]
Sets the voltage limit for DRAM over-voltage protection. If set to Auto, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the memory/ system.
fDRAM Under Voltage Protection [Auto]
Sets the voltage limit for DRAM under-voltage protection. If set to Auto, BIOS will
configure this setting automatically.
fDRAM Over Current Protection [Auto]
Sets the current limit for DRAM over-current protection. If set to Auto, BIOS will
configure this setting automatically.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the current range for over-current protection.
fDRAM Switching Frequency [Auto]
Sets the DRAM switching frequency to stabilize system (low frequency) or to
increase the overclocking range (high frequency). If set to Auto, BIOS will configure
this setting automatically.
fDRAM VRM Over Temperature Protection [Auto]
Sets the temperature limit for DRAM VRM over-temperature protection. The DRAM
frequency may be throttled when VRM temperature over the specified value. If set
to Auto, BIOS will configure this settings.
f SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identification) support.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
f CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
f DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.
To Next Page
Loading...
