MSI Z170A XPOWER GAMING TITANIUM EDITION - Page 69

69
BIOS Setup
▶
CPU SA Over Voltage Protection [Auto]
Sets the voltage limit for CPU SA over-voltage protection. If set to Auto, BIOS will
con󰘰gure this setting automatically. Higher voltage provides less protection and
may damage the system.
▶CPU SA Under Voltage Protection [Auto]
Sets the voltage limit for CPU SA under-voltage protection. If set to Auto, BIOS will
con󰘰gure this setting automatically.
▶CPU SA Over Current Protection [Auto]
Sets the current limit for CPU SA over-current protection.
[Auto] This setting will be con󰘰gured automatically by BIOS.
[Enhanced] Extends the current range of over-current protection.
▶CPU SA Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU SA voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to Auto, BIOS will con󰘰gure this setting
automatically.
▶CPU SA VRM Over Temperature Protection [Auto]
Sets the temperature limit of CPU SA VRM over-temperature protection. The CPU
frequency may be throttled when temperature over the speci󰘰ed value. If set to
Auto, BIOS will con󰘰gure this settings.
▶CPU Core/ GT Voltage Mode [Auto]*
Selects the control mode for CPU Core/ GT voltages.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
▶CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
▶DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.
▶PCH Voltages control [Auto]
These options allows you to set the voltages related to PCH. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.