EasyManua.ls Logo

MSL MSF-390 - Safety Principles; General Operation Notice; Core Safety Principles

MSL MSF-390
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AIR COMPRESSOR MANUAL
- 6 -
1. Safety Principles
1-1 General Notice
The user must observe safety principles to prevent accident during operation.
The user must pay attention to preventive maintenance table to prevent accident.
Read the operation manual of your compressor and its drive engine carefully.
1-2 Safety Principles
This machine is designed and constructed for only breathing air compressor so, user
has not to use for other purposes.
Allow only qualified personnel to operate the compressor.
Take care that the intake air is pure and free of toxic gases and exhaust fumes.
Machine operation can be stopped by pressing Emergency Stop Switch
in dangerous
situations.
Do not place any objects on compressor while in operation.
Make sure no person or object can accidentally touch any moving parts while
running.
All work on compressor must be carried out while compressor is plugged off and
depressurized.
Check regularly for leaks by brushing all fittings and couplings with a soap solution.
Never weld high pressure tubing.
Filling-hoses must be in perfect condition; special attention should be paid to he
connecting fittings
Units installed with electric motor must be disconnected the power-cable prior to
any work.
Make sure no person is within one meter of the drain-hoses before draining the
condensate
Do not touch the exhaust while the engine is running and within ten minutes after
shutting down.
The main power supply must always disconnected after operation.
The power transmission belt guards should not be opened except checking
main power supply.
The operator should wear ear protection if exposed to the noise of the running
compressor for the extended periods of time.