To Next PageTo Next Page
Need help?Do you have a question about the mspa Aurora and is the answer not in the manual?
General| Heater | 4kW |
|---|---|
| Filter Pump | 1.5HP |
| Seating Capacity | 4 |
| Number of Jets | 118 Air Jets |
| Voltage | 220-240V/50Hz |
| Heat Increasing Rate | 1.5 - 2°C/Hour (3 - 4°F/Hour) |
Details risks of drowning, injury, electric shock, and grounding requirements.
Advises on temperature, children, pets, alcohol, medical conditions.
Step-by-step guide for testing the Ground Fault Circuit Interrupter.
Details electrical bonding and grounding connections for safety.
Lists additional warnings on usage, chemicals, and environmental factors.
Explains hyperthermia symptoms and advises caution with alcohol and medication.
Advises on setup, usage, chemical handling, and consulting a physician.
Details specifications for Aurora, Rimba, and Vito models.
Lists technical details for the control system, heater, and blower.
Lists and illustrates all components included in the spa package.
Guidance on selecting a suitable location and preparing the site for spa installation.
Instructions on how to test the Ground Fault Circuit Interrupter before use.
Step-by-step guide on inflating the spa tub and checking air pressure.
Explanation of how to read and use the manometer for correct air pressure.
Instructions for inflating the spa bladder and connecting components.
Guidance on attaching the filter cartridge for water purification.
Procedure for filling the spa tub with water, including warnings.
Explains the LED display and how to operate the heating system.
Details on setting the heating timer and the anti-icing system.
Instructions for operating the filtration and bubble massage functions.
Guides on using UVC sanitizer, ozone, temperature display, and safety lock.
Steps for inspecting, cleaning, and replacing the filter cartridge.
Guidance on water changes, cleaning, sanitation, and water balance parameters.
Detailed steps for draining the spa tub and drying it.
Instructions for deflating the spa tub and its internal air bladder.
Instructions on how to repair punctures in the spa tub and air bladder.
Guidance on cleaning, drying, and storing the spa for future use.
Information on responsible disposal and recycling of the product.
Lists LED error codes, their causes, and solutions.
Common problems, their causes, and recommended solutions for the spa.
Guidance on locating the serial number and finding service contacts.
Details the MSpa limited warranty terms, coverage, and exclusions.
