10
REF. NO. PARTS DESCRIPTION QTY.
Spa cover with aluminum foil inside
(Alpine M-009LS/019LS comes with a ground mat with the cover)
Spa tub
Control panel with air pipe
Digital lock (except for Alpine M-009LS/019LS)
Inflation hose
Manometer
Filter cartridge
Spa drain valve adaptor
Repair kit
Wrench
Wicker side bar (Only for Nest M-001LS)
Buckle spa cover and ground mat set (For Alpine M-009LS/019LS)
LED strip (Only for Glow M-022LS)
Instruction DVD
NOTE: When ordering parts, be sure to quote the model number and part numbers.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FIRST USE AND SET-UP PREPARATION
The spa can be installed indoor and outdoor. For household use only.
The spa must be set up on a flat, smooth and supporting surface that is capable of supporting the
maximum load of the filled spa with listed maximum occupants.
Make sure the area is free of sharp objects under or around the spa. Uneven of unsound surfaces can
damage the spa and void your warranty. Level the surface before filling spa with water.
Provide adequate drainage system around the spa to deal with overflow water and splashes.
Make sure there is enough clearance around the spa for full access to the spa equipment for maintenance
and/or service.
●
●
●
●
●
Site preparation and requirements
To Next Page
Loading...
Need help?
General