mspa TRIBECA F-TR062W User Manual (English)

Questions and Answers:

A
Anthony MartinezAug 3, 2025
Why is my mspa TRIBECA F-TR062W not heating properly?
- A
  Andrew PalmerAug 3, 2025
  If your MSpa Hot Tub isn't heating properly, try these steps: * Set a higher temperature. * Clean or replace the filter cartridge. * Add more water to the minimum line. If these steps don't resolve the issue, there may be a heater failure, in which case you should contact your local MSpa Service Center. Also, make sure the filter pump is working; if not, refer to the "FILTER PUMP DOES NOT WORK" section.
E
ethanandersonAug 7, 2025
How to clean mspa TRIBECA F-TR062W water?
- J
  James GrantAug 7, 2025
  If the water in your MSpa Hot Tub isn't clean, try the following: 1. Change the water if it has been used for a long period of time. 2. Extend the filtration time. 3. Clean or replace the filter cartridge. If these steps don't help, refer to the chemical manufacturer’s instructions for proper water maintenance.
M
Maria AlvaradoAug 12, 2025
How to fix no display on mspa TRIBECA F-TR062W Hot Tub control panel?
- C
  catherine25Aug 12, 2025
  If the control panel on your MSpa Hot Tub isn't displaying anything, first try changing the power socket or repairing the existing one. If that doesn't work, reset the PRCD by following the PRCD Testing section. If the PRCD is broken, contact your local MSpa Service Center.
D
David MillerAug 15, 2025
What to do if my mspa TRIBECA F-TR062W Hot Tub is leaking?
- B
  Brian KleinAug 15, 2025
  If your MSpa Hot Tub is leaking, check the in&outlet connections and tighten them securely. Also, ensure the drainage valve is completely closed. If the spa continues to leak, contact the MSpa Service Center. If water is leaking from the spa pool body itself, repair the hole or split using the provided repair kit material.
J
Jake MurphyAug 20, 2025
Why filter pump does not work in mspa TRIBECA F-TR062W Hot Tub?
- S
  Sylvia OwensAug 20, 2025
  If the filter pump on your MSpa Hot Tub isn't working, clean or replace the filter cartridge, as it might be clogged. If that doesn't solve the problem, there may be a filter system failure, and you should contact your local MSpa Service Center.
A
Anthony GomezAug 25, 2025
Why is there no bubble in my MSpa Hot Tub?
- Z
  zcollinsAug 25, 2025
  If there are no bubbles in your MSpa Hot Tub, it might be due to the auto-off function, which activates after 10 minutes. Wait for 10 minutes and then press the Bubble button again. If that doesn't work, there may be damage to internal parts or a broken one-way valve, in which case you should contact your local MSpa Service Center.
M
Matthew FitzgeraldAug 29, 2025
What to do if Ozonator Failure in MSpa Hot Tub?
- J
  Janice LewisAug 29, 2025
  If the ozonator in your MSpa Hot Tub isn't working, first ensure that the water level is above the minimum line and add water if needed. If the issue persists, it could be due to damaged internal parts, requiring you to contact your local MSpa Service Center. Also, check if the filter pump is working correctly by referring to the “FILTER PUMP DOES NOT WORK” section.