Maintenance and Cleaning
No component of your MT HELMETS can be damaged by water.
All interiors as well as side pads are machine washable. Wash
it with a mild detergent in warm water and let it air dry. Hand
washing is recommended but it can also be machine washed.
Use a delicate cycle to prevent the centrifugate from damaging
the delicate material of the coating parts. Do not place any lin-
ing parts in the dryer: excess heat can damage the foam and lin-
ers. The visor can be cleaned with plastic enamel or mild soap
and water. The shell of your helmet should be cleaned with a
mild detergent and water.
Warning
Never use chemicals, solvents, gasoline, cleaning agents or
petroleum-based detergents to clean shell, lining or visor of
your helmet, because they could be seriously damaged by
the use of such products.
Warranty
If you have a warranty claim, please send an email to
info@mthelmets.com
31
MAINTENANCE AND WARRANTY
To Next Page
Loading...
