10
SECTION 4: KNOW YOUR LAWN MOWER
Figure 7
Read this operator’s manual and safety rules before
operating your lawn mower. Compare the illustration in
Figure 7 with your lawn mower to familiarize yourself
with the location of various parts and controls. Save this
manual for future reference.
WARNING: The operation of any lawn mower
can result in foreign objects being thrown into the
eyes, which can damage eyes severely. Always
wear safety glasses while operating the mower, or
while performing any adjustments or repairs.
Motor/Blade Control Assembly
The motor/blade control is located on the upper handle
of the mower. Refer to Figure 7. The motor/blade
control handle engages and disengages the motor and
blade.
WARNING: The motor / blade control
assembly is a safety device. Never attempt to
bypass its operations.
Rear Trailing Shield
The rear trailing shield, attached between the rear
wheels of your mower, is provided to minimize the
possibility of objects being thrown at the operator from
the rear of the mower.
Circuit Breaker
The mower is equipped with a circuit breaker, located
on the motor/blade control. Refer to Figure 7. This
circuit breaker may trip when too much strain is placed
on the mower. See Making Adjustments Section.
Guide Rod and Cord Restraint
The cord restraint is located on the back of the upper
handle attached to the guide rod. When used properly,
the cord restraint helps to protect the motor/blade
control assembly and also the extension cord powering
the unit.
Grass Catcher
The grass catcher assembly is designed to catch the
grass clippings that are cut from your lawn. Never mow
without the grass catcher in place on the machine.
Electric Motor
The electric motor is attached to the cutting blade.
When engaged, the electric motor turns the cutting
blade and works to cut grass.
Cord Insulator
Lower Handle
Motor/Blade Control Assembly
Electric Motor
Grass Catcher
Rear Discharge Door
Rear Trailing Shield
Cord Restraint
Guide Rod
To Next Page
Loading...
Need help?
General
