MTD 340 Thru 390 - Page 17

17
Model 340 Thru 345
Ref.
No.
Part No. Part Description
1. 712-0442 Acorn Lock Nut 1/4-20
2. 736-3020 Flat Washer .271” I.D. x .630” O.D.
3. 731-1599 Handle Cover
4. 712-0287 Hex Nut 1/4-20 Gr.2
5. 720-0274 Handle Grip
6. 686-0083 Clutch Handle Assembly
7. 720-0269 Clutch Grip
8. 710-0641 Hex Bolt 1/4-20 x 2.25” Lg. Gr.5
9. 731-1645A Clutch Handle Holder
10. 736-0140 Flat Washer .385” I.D. x .62” O.D.
11. 649-0039 Handle Assembly Comp. †
649-0022B Handle Assembly Comp. ††
12. 647-0042 Adjustment Crank †
13. 726-0211 U Nut 5/16-18 †
14. 749-1101 Handle Brace †
15. 736-0921 Lock Washer 1/2 †
16. 710-3194 Hex Bolt 1/2-20 Gr. †
17. 786-0005 Depth Bar
18. 714-0149B Cotter Pin
19. 712-3004A Hex Flange L-Nut 5/16-18
20. 786-0003 Tail Piece Bracket (L.H.)
21. 786-0004 Tail Piece Bracket (R.H.)
22. 711-0415 Clevis Pin
23. 710-0805 Hex Bolt 5/16-18 x 1.5” Lg.
24. 710-0189 Hex Bolt 5/16-18 x 3” Lg.
25. 736-0242 Wash. Bell. .340” I.D. x .872” O.D.
26. 711-1036 Spec. Hex Nut
27. 736-0119 L-Wash. 5/16” I.D.
28. 710-3008 Hex Bolt 5/16-18 Gr. 5
29. 786-0129 Cable Guide Bracket
30. 710-0604 Hex Wash Screw 5/16-18 x .62”
31. 710-0602 Hex Wash. Hd. TT-Tap Scr.
32. 738-0934 Shdl. Bolt 5/16-18
33. 786-0138A Frame (R.H.)
34. 786-0139A Frame (L.H.)
35. 736-0171 Lock Washer 7/16
36. 712-0240 Jam Nut 7/16-20 Gr. 2
37. 710-0176 Hex Bolt 5/16-18 x 2.75” Lg.
38. 712-0429 Hex Nyloc Nut 5/16-18 Thd.
39. 711-0415 Clevis Pin
40. 714-0149B Cotter Pin
41. 686-0081A Wheel Hanger Brkt. Assy
42. 734-1566 Wheel Ass’y 8” x 1.75”
43. 738-0929 Shoulder Screw .496 x 1.445
44. 750-0890 Spacer
45 712-3004A Hex Flange L-Nut 5/16-18 Thd. ††
46 720-0195 Hand Knob ††
47 749-0915A Engine Tube Brace (Std. B&S)
749-1082 Engine Tube Brace (Tec.)
48 710-1236 Carr. Bolt 5/16-18 x 1 ††
49 736-0242 Bell. Wash. .34” I.D. ††
50 786-0159 Engine Brkt. (Std B&S)
Ref.
No.
Part No. Part Description
† Briggs & Stratton Intek Engine
†† Standard Briggs & Stratton and Tec. Engine