Need help?Do you have a question about the MTD 215-355AB2 and is the answer not in the manual?
Step-by-step guide for assembling the wheels onto the tiller unit.
Instructions for attaching and orienting the tiller tines correctly for soil engagement.
Procedure for attaching the tiller handle to the main frame.
Guide to installing and adjusting the clutch control lever assembly.
Instructions for connecting and adjusting the control rod linkage.
Procedure for assembling and connecting the throttle control.
Instructions for attaching the tailpiece to the tiller assembly.
Guide for attaching the depth bar to the tailpiece.
Instructions on how to adjust the tiller handle to different heights.
Guidance on setting the tailpiece to stationary or free-floating mode.
Information on adjusting the bearing cap for the tiller gear case.
Detailed steps for replacing the oil seals in the tiller gear case.
Procedure for removing the drive belt for forward operation.
Procedure for removing the drive belt for reverse operation.
Detailed parts list for the tiller's gear case assembly.
Comprehensive parts list for models 215-355AB2 and 215-360AB2.
Information required for submitting warranty claims for parts or defects.
To Next Page
General