Need help?Do you have a question about the MTD 600-Series L Style and is the answer not in the manual?
General| Brand | MTD |
|---|---|
| Model | 600-Series L Style |
| Category | Snow Blower |
| Language | English |
Record model and serial number for service and support.
Contact information and assistance options for product issues.
Read, understand, and follow all instructions before operation and assembly.
Inspect area, wear safety gear, and prepare the machine before use.
Avoid tampering with the governor setting to prevent unsafe speeds.
Information on EPA emission regulations for engines.
Warning about using the machine on certain land without a spark arrester.
Lists the items included with the snow thrower.
Steps to attach and secure the snow thrower's handle.
Steps to attach and secure the chute assembly.
Instructions for storing replacement shear pins.
Information about the clean-out tool and its location.
Guidelines for using the correct type of gasoline.
Safety precautions and steps for refueling the machine.
How to check the engine oil level before operation.
Recommended tire pressure for proper operation.
How to adjust skid shoe height for different surfaces.
How to check and adjust the auger control cable.
How to adjust the chute angle to change snow throw distance.
Location and function of the shift lever for speed and direction.
Function of the choke control for starting the engine.
Role of the ignition key as a safety device for starting the engine.
Regulates engine speed and shuts off the engine.
Aids cold-weather starting by forcing fuel into the carburetor.
Locations for checking and adding engine oil.
Component where engine exhaust exits.
Positioned based on surface conditions for clearance.
Requires a 120V power source for electric start.
Used for manually starting the engine.
Engages the electric starter when plugged in.
Step-by-step instructions for starting the engine.
Safety and usage instructions for the electric starter.
Instructions for manually starting the engine using the recoil starter.
How to engage the drive system to move the snow thrower.
How to engage the augers to start throwing snow.
Instructions and warnings for replacing shear pins.
Checking and replacing wear items like shave plates and skid shoes.
Checking and maintaining correct tire pressure.
Lubrication points and schedule for the gear shaft.
Maintenance for the wheels and axles.
Lubrication procedures for the auger shaft.
Adjusting the shift cable for proper speed range.
Adjusting the drive control cable for proper engagement.
Adjusting chute cables for full range of motion.
Instructions for storing the snow thrower when not in use.
Table outlining regular maintenance tasks and intervals.
Step-by-step guide for draining and refilling engine oil.
Guidance on oil type, viscosity, and capacity.
Instructions for checking, cleaning, and gapping the spark plug.
How to clean the engine and safety precautions.
Procedures for preparing the engine for long-term storage.
Detailed steps for removing and replacing the auger belt.
Instructions for removing and replacing the drive belt.
Steps to remove and replace the friction wheel.
Instructions for reassembling the friction wheel components.
Common causes and remedies for engine starting issues.
Causes and remedies for inconsistent engine operation.
Causes and remedies for engine overheating.
Causes and remedies for excessive machine vibration.
List of components with their part numbers and descriptions.
Outlines owner responsibilities regarding warranty.
Details the manufacturer's warranty coverage for emission parts.
Lists owner's duties for maintaining warranty.
Specific requirements for warranty claims for small off-road engines.
MTD's warranty for conformity and defects.
Details MTD's warranty for new merchandise against defects.
Warranty limitations for parts subject to normal wear.
Warranty for attached accessories.
Procedures for obtaining warranty service.
To Next Page
