MTD 31A-612 User Manual

IMPORTANT !
Record the Model No. and Mfg.
Code which appear on your unit
in the space provided. You must
have these numbers, along with
the date of purchase, in order to
receive warranty or service.
DATE PURCHASED: -
Owner’s
Manual
•SET-UP
•OPERATION
•MAINTENANCE
IMPORTANT
Read Safety Rules and
Instructions Carefully
Model Number
MTD PRODUCTS LIMITED
KITCHENER, ON N2G 4J1
1-800-668-1238
XXXXXXXXXX
Serial Number
XXXXXXXXXXX
COPY DIRECTLY FROM THE UNIT.
PRINTED IN CANADA OGST-702
SMALL FRAME TWO STAGE
SNOWTHROWER

MTD 31A-612 Specifications

General

Type	Two-Stage
Auger Material	Steel
Clearing Width	21 inches
Engine Type	4-Cycle
Intake Height	13 inches
Starter Type	Electric Start
Chute Control	Manual

Summary

CALLING CUSTOMER SUPPORT

Locate Model and Serial Number

Record your unit's model and serial numbers for warranty and service.

Contacting Customer Support

IMPORTANT SAFE OPERATION PRACTICES

General Safety Warnings

Highlights symbols and general safety rules for operating the machine safely.

DANGER and WARNING Statements

Details severe risks and capabilities of the machine, emphasizing operator error.

Training Guidelines

Covers essential training, user familiarity, and preparation steps before operation.

Pre-Operation Preparation

Outlines crucial pre-operation checks and preparations for safe use.

Safe Gasoline Handling

Operating Precautions

Maintenance and Storage Procedures

Safety Device Checks

General Maintenance Checks

ASSEMBLY INSTRUCTIONS

FINAL ASSEMBLY AND ADJUSTMENTS

CONTROLS

Auger Clutch Grip

Drive Clutch Grip

BEFORE STARTING

Check Oil Level

Critical step to check oil level before starting the engine to prevent damage.

TO START ENGINE

TO START ENGINE (Recoil Starter)

Electric Starter Operation

Instructions and warnings for using the optional electric starter.

Recoil Starter Operation

Procedures for starting the engine using the recoil starter.

TO STOP ENGINE

Engine Shutdown Procedure

TO ENGAGE DRIVE

Shifting and Engaging

DRIVE WHEELS

Wheel Drive Configuration

LUBRICATION

Wheels

Gear Box

MAINTENANCE

Augers

Shave Plate and Slide Shoes

AUGER DRIVE BELT

DRIVE BELT

CHANGING THE FRICTION WHEEL RUBBER

STORAGE INSTRUCTIONS