To Next Page
S
Stephanie VincentAug 10, 2025
What to do if my MTD Snow Blower fails to discharge snow?
- CCollin BatesAug 10, 2025
If your MTD Snow Blower fails to discharge snow, several issues could be the reason. First, the chute assembly might be clogged; in this case, stop the engine, disconnect the spark plug wire, and clean the chute and inside of the auger housing using a clean-out tool or stick. Another potential cause is sheared shear pins, which would require replacement. A foreign object lodged in the auger can also prevent discharge; to resolve this, stop the engine immediately, disconnect the spark plug wire, and remove the object. Additionally, the auger control cable might be out of adjustment and should be adjusted, or the auger belt may be loose or damaged, necessitating a replacement.
General