Need help?Do you have a question about the MTD SNOW THROWER and is the answer not in the manual?
General| Brand | MTD |
|---|---|
| Model | SNOW THROWER |
| Category | Snow Blower |
| Language | English |
Read operating instructions carefully before first use and keep them safe.
Details for identifying the machine for spare parts and service.
Explains functions of coupling bar, clutch levers, protective grid, and discharge flap.
Covers symbols for operation, hazards, and general information.
Guidelines for disposing of packaging and old machines.
Covers oil level, safety devices, tyre pressure, and clutch/lever checks.
Safety steps before performing any work on the machine.
Methods for adjusting machine settings based on terrain and snow.
Precautions for safe fueling and checking engine oil levels.
Covers injury risks, illumination, pace, ground, asphyxiation, fire, and damage prevention.
Includes pre-start checks, pull starter, and optional electric starter instructions.
Instructions for operating Type 1 and Type 2 models, including gear and chute control.
Covers chute, levers, gears, and freewheel levers for steering.
Instructions to prevent tipping over and ensure safe operation on inclines.
Advice on timing, wind direction, and clearing overlap for efficiency.
Mandatory safety steps before clearing blockages.
Details on optional accessories like heated handles, lights, and drift cutters.
Covers maneuvering, safe transport methods, and pre-transport checks to prevent damage.
Covers cautions on damage, hazardous materials, cleaning, and lubrication.
Warning and procedure for adjusting tyre pressure for Type 2-9 models.
Procedure for checking and adjusting the worm drive clutch cable.
Procedure for setting the travel drive clutch using levers and gears.
Detailed steps for adjusting coupling cables for Type 2 and Type 3-9 models.
Instructions for adjusting V-belt tension on Type 1 models.
Procedures for adjusting shift levers and caterpillar tracks.
Steps for replacing shear bolts and clearing plates on various models.
Replacing skids and re-adjusting chute rod for specific types.
Steps for preparing the machine for long-term storage, including fuel handling.
Precautions against accidental starting when performing checks.
Addresses engine not starting and uneven running issues.
Solutions for machine not clearing snow or not driving along.
Troubleshooting excessive vibration and difficulty changing gears.
To Next Page
