MTD E660G - User Manual

OPERATOR’S MANUAL
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
PRINTED IN U.S.A.
SNOW THROWER
MODELS
E600E, E610E
E640F, E660G
FORM NO .
770-10002E.fm
(5/2001)

Summary

Important Safe Operation Practices

Training

Guidelines for understanding and operating the snow thrower safely and effectively.

Preparation

Steps to prepare the snow thrower and the operating area for safe use.

Operation Safety

Instructions for safe operation of the snow thrower, including warnings and precautions.

Maintenance and Storage

Hardware Pack Contents

Assembling Your Snow Thrower

Final Adjustments

Adjusting skid shoes and tire pressure for optimal performance and safety.

Auger Control Adjustment

How to adjust the auger control cable for proper engagement and disengagement.

Know Your Snow Thrower

Operating Controls Overview

Identification and function of all controls on the snow thrower for user operation.

Shift Lever and Speeds

Explanation of the gear shift lever and available forward/reverse speeds.

Auger and Traction Controls

Operating Your Snow Thrower

Before Starting Procedures

Essential checks and preparations before starting the snow thrower engine.

Starting the Engine

Step-by-step guide for starting the snow thrower engine using recoil or electric starter.

Stopping and Engaging Drive

Making Adjustments

Traction Control Adjustment

Maintaining Your Snow Thrower

Service and Repairs

Belt Replacement

Trouble Shooting Guide

Engine Starting Issues

Diagnosing and correcting problems when the engine fails to start.

Engine Performance Problems

Troubleshooting erratic engine running, loss of power, or overheating.

Manufacturers Limited Warranty

Warranty Coverage and Exclusions

MTD E660G Specifications

General

Brand	MTD
Model	E660G
Category	Snow Blower
Language	English