EasyManua.ls Logo

MTD 31AE5MLG729 User Manual

MTD 31AE5MLG729
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service Manual
MTD Products LLC - Product Training and Education Department
FORM NUMBER 769-01418
9/2004
31AE5MLG729 Two-Stage Snow Thrower
NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power 
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals. 
These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperienced 
individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all instructions 
and common sense when working on power equipment. This includes the contents of the product’s Operators Manual, supplied 
with the equipment. No liability can be accepted for any inaccuracies or omission in this publication, although care has been 
taken to make it as complete and accurate as possible at the time of publication. However, due to the variety of outdoor power 
equipment and continuing product changes that occur over time, updates will be made to these instructions from time to time. 
Therefore, it may be necessary to obtain the latest materials before servicing or repairing a product. The company reserves the 
right to make changes at any time to this publication without prior notice and without incurring an obligation to make such 
changes to previously published versions. Instructions, photographs and illustrations used in this publication are for reference 
use only and may not depict actual model and component parts. © Copyright 2005 MTD Products Inc. All Rights Reserved.
Question and Answer IconNeed help?

Do you have a question about the MTD 31AE5MLG729 and is the answer not in the manual?

MTD 31AE5MLG729 Specifications

General IconGeneral
Engine Type4-cycle OHV
Engine Displacement357cc
Intake Height21 inches
Throwing DistanceUp to 40 feet
Drive TypeSelf-propelled
Fuel Tank Capacity5 quarts
Auger MaterialSteel
Forward Speeds6
Reverse Speeds2
Chute Rotation200 degrees
Drive SystemFriction disc
Tire Size16 x 6.5 inches
Start TypeElectric start with recoil backup
StagesTwo-Stage
Starter TypeElectric and recoil

Summary

General Information

Tire Pressure

Chute Installation

Skid Shoe and Shave Plate Adjustment

Shave Plate Replacement

Drive Control Cable Adjustment

Auger Control Testing and Adjustment

Shift Rod Adjustment

Auger Belt Replacement

Drive Belt Replacement

Friction Wheel Removal

Planetary Gear Removal

Drive Shaft Removal

Axle Shaft Removal

Splitting the Unit

Friction Wheel Disc Disassembly

Auger Pulley Removal

Auger and Impeller Removal

Reducer Transmission

Reduction Transmission Disassembly

Auger Idler Arm

Related product manuals