EasyManua.ls Logo

MTD 31AE640F352 User Manual

MTD 31AE640F352
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-9722
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required
by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark
arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131
Cleveland, Ohio 44136-9722.
PRINTED IN U.S.A.
SNOW THROWER
MODEL
31AE640F352
FORM NO
.
770-10167D.fm
(6/2002)
Question and Answer IconNeed help?

Do you have a question about the MTD 31AE640F352 and is the answer not in the manual?

MTD 31AE640F352 Specifications

General IconGeneral
BrandMTD
Model31AE640F352
CategorySnow Blower
LanguageEnglish

Summary

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

TRAINING

Instructions for understanding controls, safety, and user responsibilities before operation.

PREPARATION

Steps to inspect the area, wear safety gear, and prepare the machine before starting.

OPERATION

Guidelines for safe operation, including hand/foot placement and control usage.

MAINTENANCE AND STORAGE

General Maintenance

Regular checks, cleaning, and parts inspection for safe operation and longevity.

Storage Guidelines

Instructions for preparing and storing the snow thrower during off-season periods.

SECTION 2: ASSEMBLING YOUR SNOW THROWER

Loose Parts

Identification and description of included spare parts and hardware for assembly.

Assembly Steps

Detailed instructions for connecting handles, cables, and other components.

Lamp Wiring

Guidance on connecting the snow thrower's lamp to the engine's electrical system.

SECTION 3: KNOW YOUR SNOW THROWER

Operating Controls Overview

Explanation of all controls, including shift lever, auger, and chute direction.

SECTION 4: OPERATING YOUR SNOW THROWER

Before Starting Procedures

Pre-operation checks, fuel/oil fill-up, and initial engine setup.

Starting the Engine

Instructions for starting the engine using recoil or electric starter methods.

Stopping the Engine

Engaging Drive and Augers

Auger Control Test

Chute Clean-out Tool Usage

Operating Tips

SECTION 5: MAKING ADJUSTMENTS

Adjusting Auger Control

Steps to adjust the auger control cable for proper engagement.

Adjusting Chute Assembly

How to change the angle of the chute to control snow discharge distance.

Tire Pressure Adjustment

Checking and adjusting tire pressure for optimal performance and handling.

Traction & Shift Lever Adjustment

Adjusting traction control and shift lever for smooth operation.

Shift Rod Adjustment

Procedure for adjusting the shift rod to ensure proper gear engagement.

Skid Shoes Adjustment

Drive Wheels Configuration

SECTION 6: MAINTAINING YOUR SNOW THROWER

Lubrication Guide

Recommended lubrication points and frequency for engine, gears, and bearings.

Drive & Shifting Mechanism Maintenance

Oiling chains, sprockets, gears, and shifting components.

Wheel Maintenance

Lubricating wheel bearings and cleaning axles.

SECTION 7: SERVICE

Auger Service

Checking and replacing auger shear bolts and inspecting auger turning.

Shave Plate & Skid Shoes Service

Inspecting and replacing wear parts like shave plates and skid shoes.

Belt Replacement

Instructions for replacing auger and drive belts, including safety precautions.

Changing Friction Wheel Rubber

SECTION 8: OFF-SEASON STORAGE

Storage Preparation

Steps for preparing the snow thrower for long-term storage, including fuel and cleaning.

SECTION 9: TROUBLE SHOOTING GUIDE

Engine Starting Issues

Diagnosing and fixing problems related to the engine failing to start.

Engine Running Problems

Troubleshooting erratic engine performance, loss of power, and vibration.

Propulsion & Discharge Issues

Resolving problems with the unit failing to move or discharge snow.

SECTION 10: MODEL 31AE640F352 PARTS LIST

Component Identification

Visual diagrams and reference numbers for all snow thrower parts.

MANUFACTURER'S LIMITED WARRANTY

Obtaining Warranty Service

Steps and contact information for requesting warranty repairs or replacements.

Warranty Limitations & State Law

Information on warranty exclusions, implied warranties, and state-specific rights.

Related product manuals