MTD 710, 700 - Specifications and Guarantee Information; Product Specifications; Warranty Information

19
SPECIFICATIONS
ENGINE
Engine Type........................................................................................................................................... Air-Cooled, 2-Cycle
Ignition Type.......................................................................................................................................................... Electronic
Displacement........................................................................................................................................... 31 cm
3
(1.9 cu. in.)
Maximum Engine Performance in accordance with ISO 8893.......................................................................... 75 kw (1 hp)
Idle RPM...................................................................................................................................................... 3200 min
-1
(rpm)
Operating RPM............................................................................................................................................ 7700 min
-1
(rpm)
Fuel.......................................................................................................................................... Fuel/Oil Mixture (40:1) 2,5 %
Ignition Switch ............................................................................................................................................... Rocker On/Off
Starter............................................................................................................................................................... Auto Rewind
Fuel Tank Capacity........................................................................................................................................ 355 ml (15 oz.)
DRIVE SHAFT & CUTTING HEAD
Drive Shaft Housing............................................................................................................................................. Steel Tube
Throttle Control ........................................................................................................................................ Finger-Tip Trigger
Cutting Head.......................................................................................................................................... Bump Line Release
Trimming Line Diameter............................................................................................................... 2 mm (0.080 in.), dual line
Cutting Path Diameter.................................................................................................................................. 381 mm (15 in.)
Mass (without fuel)................................................................................................................................... 4.87 kg (10.75 lbs)
ACCESSORIES on request
GUARANTEE
The guarantee conditions that apply in each country are
published by either our company or the importer of our
products. Faults will be repaired free of charge within the
framework of the guarantee, provided that they have been
caused by a material defect or manufacturing error. In the
case of a guarantee repair, please contact your dealer or
our nearest branch office.