To Next PageTo Next Page
Need help?Do you have a question about the MTD 795, 792, 791, 790 and is the answer not in the manual?
General| Cutting Width | 21 inches |
|---|---|
| Deck Material | Steel |
| Starter Type | Recoil |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Weight | 60 lbs |
Provides owner assistance and troubleshooting resources.
Essential safety rules and procedures for operating the lawn tractor.
Safety precautions and techniques for mowing on inclines.
Dangers of children near the mower and necessary precautions.
Guidelines and warnings for towing equipment with the tractor.
Instructions for safe refueling and storage of gasoline to prevent fires.
General maintenance and safety checks for tractor operation.
Lists components packaged with the manual.
Steps to remove shipping restraints before operation.
Instructions for installing the steering wheel.
Guidance on connecting the tractor's battery cables correctly.
Procedures and warnings for filling fuel tank and checking engine oil.
Recommended tire inflation for safe and optimal operation.
Steps for securely mounting and adjusting the tractor seat.
Identifies and explains the function of all major controls and levers.
Explains the safety system preventing unsafe operation.
Step-by-step guide to engage the parking brake.
How to adjust the cutting deck to the desired grass height.
Procedures and warnings for safely starting the tractor's engine.
Instructions for properly shutting down the tractor's engine.
Basic instructions and warnings for driving the tractor.
Specific safety advice for operating the tractor on sloped terrain.
Steps to power the cutting deck or other attachments.
Guidelines and tips for effective and safe mowing.
Best practices for using the mulching kit for grass clippings.
How to move the tractor without the engine using the hydrostatic relief valve.
Adjusting the cutting deck for an even cut.
Procedures for adjusting the operator's seat for comfort and control.
How to adjust the parking brake if it is not holding effectively.
Steps to adjust the steering linkage for proper directional control.
Covers engine oil, air cleaner, spark plugs, and lubrication points.
Procedures for cleaning the engine, deck, and using the deck wash system.
Procedures for detaching the cutting deck from the tractor.
Information on tire pressure and maintenance.
Instructions for changing the tractor's transmission drive belt.
Maintenance, charging, and jump-starting procedures for the tractor battery.
Location and function of the electrical system fuse.
Safety and procedures for removing, sharpening, or replacing cutting blades.
Steps to replace the belt that drives the cutting deck.
