Engine Assembly
55
8. Carefully disconnect the breather hose from the air
filter housing.
9. Disconnect the throttle cable. See Figure 8.5.
10. Remove the carburetor, fuel tank and lines as one
assembly.
11. Remove the throttle cable by pressing in the tabs
located in the slots while lifting the cable out.
See Figure 8.6.
12. Remove the gasket between the carburetor and the
spacer.
Figure 8.4
Carefully remove the
breather/PCV hose
Figure 8.5
Throttle cable
Figure 8.6
Press in the tabs
Gasket
To Next Page
Loading...
