EasyManua.ls Logo

MTD BV3100 - Troubleshooting; Engine Starting Problems; Engine Performance Issues; Blowing;Vacuuming Problems

MTD BV3100
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
GB13
CAUSE ACTION
Bag is full Empty Bag. See Empty the Vacuum Bag
Blocked tube Clear Blockage. See Clearing a Blocked
tube/Impeller
Blocked impeller Clear Blockage. See Clearing a Blocked
tube/Impeller
Damaged impeller Take unit to an authorized service dealer
CAUSE ACTION
Old or improperly mixed petrol Drain petrol tank / Add fresh petrol mixture
Improper carburettor adjustment Take to an authorized service dealer for
carburettor adjustment
CAUSE ACTION
Empty petrol tank Fill petrol tank
Primer bulb wasn't pressed enough Press primer bulb fully and slowly 10 times
Engine flooded Use starting procedure with choke lever in the
RUN position
Old or improperly mixed petrol Drain petrol tank / Add fresh petrol mixture
Fouled spark plug Replace or clean the spark plug
ENGINE WILL NOT START
ENGINE WILL NOT IDLE
ENGINE WILL NOT ACCELERATE
ENGINE LACKS POWER OR STALLS WHEN UNDER LOAD
CAUSE ACTION
Air filter is plugged Replace or clean the air filter
Old or improperly mixed petrol Drain petrol tank / Add fresh petrol mixture
Improper carburettor adjustment Take to an authorized service dealer for
carburettor adjustment
CAUSE ACTION
Old or improperly mixed petrol Drain petrol tank / Add fresh petrol mixture
Improper carburettor adjustment Take to an authorized service dealer for
carburettor adjustment
UNIT WILL NOT BLOW OR VACUUM

Table of Contents

Related product manuals