MTD L 17 User Manual (English)

Questions and Answers:

C
Crystal NguyenJul 28, 2025
What to do if my MTD L 17 Blower will not switch on?
- C
  Candice MillerJul 28, 2025
  If your MTD Blower won't switch on, it might be due to several reasons. First, the power pack could be discharged, so try charging it. The power pack temperature might also be too high or too low; allow it to cool down or warm up as needed. If the power pack is defective, consider replacing it. Finally, an overcurrent release might be the issue; if this occurs again, take your device to a specialist workshop.
M
mary41Aug 7, 2025
Why does my MTD L 17 keep switching off?
- B
  Benjamin LeeAug 7, 2025
  If your MTD Blower switches off, it could be due to a few reasons. The power pack might be too hot, so allow it to cool down. Alternatively, the power pack could be discharged, so you should charge it. If the temperature of the device's electronics is too high, allow the device to cool and clean the air inlet if necessary. In the case of an overcurrent release, if it happens again, take your device to a specialist workshop.
S
stewartvalerieAug 17, 2025
How to stop vibrations in my MTD L 17?
- R
  rsalasAug 17, 2025
  Vibrations in your MTD Blower can be caused by a heavily soiled vacuum/blow turbine; clean it to resolve this. If the blowing turbine or other parts are damaged, switch off the device immediately and have the defective parts replaced by a workshop.

MTD L 17 Specifications

General

Brand	MTD
Model	L 17
Category	Blower
Language	English

Summary

Safety and Symbol Guide

Meaning of Symbols

Explains warning, caution, and operational symbols used in the manual.

Information Symbols in Manual

Explains symbols like Note, Step, Action result, Item number, Illustration label.

Unauthorized Changes Warning

Warns against making changes to the device, emphasizing safety and correct operation.

Operational Safety Rules

Danger Levels and Warnings

Defines the severity levels of warnings to indicate potential hazards.

Protection of People and Property

Guidelines for safe operation, including user restrictions and protective equipment.

Usage Tips and Precautions

Advice on safe operation, handling, and precautions during use.

Intended Use and Identification

Intended Use

Defines the exclusive purpose of the device for home and garden use.

Incorrect/Abnormal Use

Details uses that are considered incorrect and the user's liability for damage.

Identification Plate and Layout

Describes the location and components of the identification plate and device layout.

Operating Controls and Start-up

Control Elements Overview

Lists and identifies all the control elements on the device.

Start-up Procedures

Instructions for initial setup, including power pack charging.

Assembly Instructions

Attaching the Handle

Step-by-step guide for attaching the handle to the device.

Attaching Blow/Vacuum Pipe

Instructions for connecting the blow/vacuum pipes to the housing.

Attaching Transport Wheel

Steps to attach the transport wheel to the blow/vacuum pipe.

Attaching Deflector Pipe

Instructions for fitting the deflector pipe onto the housing.

Attaching Vacuum Bag

Guide for connecting the vacuum bag adapter and the bag itself.

Fixing the Carrying Belt

Instructions on how to attach and adjust the carrying belt for safe use.

Device Operation

Inserting the Power Pack

Guidance on correctly inserting the power pack for operation.

Selecting Operating Mode

How to set the lever for vacuum or blow function.

Switching On the Device

Steps to turn on the device and adjust motor speed.

Working with the Device

General Working Procedure

How to hold and move the device during operation.

Motor Speed Notes

Advice on using different speeds for light and heavy materials.

Blow Function Usage

Guidance on when and how to use the blow function.

Vacuum Function Usage

Guidance on when and how to use the vacuum function.

Switching the Device Off

How to turn off the device after use.

Servicing and Maintenance

Emptying the Vacuum Bag

Procedures for emptying the vacuum bag, with and without removal.

Removing the Power Pack

Instructions on how to safely remove the power pack.

Cleaning the Vacuum Bag

Steps for washing and cleaning the vacuum bag.

Cleaning the Blow/Vacuum Turbine

How to clean the turbine to maintain performance.

Storage and Transport

Device Storage Guidelines

Recommendations for storing the device safely and appropriately.

Transport Precautions

Guidelines for securing the device during transport.

Troubleshooting and Disposal

Common Problems and Solutions

A table listing common issues and their remedies.

Warranty Information

Details on warranty conditions and how to make a claim.

CE Declaration of Conformity

Refers to the separately enclosed CE Declaration of Conformity.

Environmentally-Friendly Disposal

Guidelines for recycling and disposing of the device and its parts.

Related product manuals

MTD Yard Machines 650 Series