24
Servicing
EN
Cleaning the vacuum bag
Î After using the device, always empty and shake
out the dust bag.
Note
Wear protective goggles and a dust mask
for this task.
Î Once per month (or more often if required) wash
the vacuum bag:
• Empty the vacuum bag thoroughly
• Turn the vacuum bag inside out
• Shake out vacuum bag
• Clean vacuum bag with a soap solution
• Leave the vacuum bag to dry
Cleaning the blow/vacuum turbine
Q
Î Loosen the xing screws
1
.
Î Open the cover
2
.
Î Remove deposits, soiling or clogging with a brush,
a dry cloth or compressed air.
Î Shut the cover back on re-apply the xing screws.
Transport and storage
WARNING!
Risk of injuries or material damage.
¾ Remove the power pack before transport
and storage.
Transport
Î Secure the device sufciently to prevent its unin-
tentional slipping if you are transporting it in or on
a motor vehicle.
Storage
Î Thoroughly clean your device at the end of each
season.
Î Always store the device in a dry and safe location
that is inaccessible to children.
Î Store the power pack and tool separately.
Î Store the power pack in a cool and dry location.
Recommended storage temperature approx.
18°C.
Î Keep the device and especially its plastic com-
ponents away from brake uids, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
leaf vacuum/blower.
Î Fertilizers and other garden chemicals contain
substances that may have a highly corrosive ef-
fect on the metal parts of the device. Therefore do
not store your device near to these substances.
To Next Page
Loading...
