MTD Cub Cadet 1000 Series - Fuel and Height Indicators; Fuel Tank and Level Indicator; Attachment Height Adjustment; Headlight Operation

Features & Controls (continued)
Fig. 4-6
Fuel Tank
approximately 1/2" increments. See
page 20 for more detailed lift
information.
Q (U, Fig. 4-6)—Fuel Level Window
Provides view of fuel tank. Fuel level is
visible through fuel tank.
(V, Fig. 4-6)—Attachment Height
Indicator
Decal and pointer provide a visual
reference to the height setting of the
mower deck, from No. 1 (lowest) to No.
7 (highest or transport). Note: The
numbers do not represent units ot
measurement.
On models with an attachment lift lever
(R, Fig. 4-3), the numbers on the decal
coincide with the seven positions on the
attachment lift handle. The pointer will
move as the lift lever is raised or
lowered. Note: The pointer is attached to
an adjustable cable. Re adjust at
attachment hitch arm mounting bracket
(see “Mower Height Indicator
Adjustment” in Section 6).
After adjusting the mower deck to the
desired cutting height, note the location
of the pointer so that you can return to
this position when desired. Note: When
mowing using the ground contour
following method, the pointer will move
back and forth as the deck follows the
contour of the ground.
Headlights
Headlights turn on when engine starts
and turn off when engine is stopped.
14