MTD Cub Cadet 1000 Series - Maintenance Schedule

Maintenance (continued)
Maintenance Chart
INTERVAL*
ITEM
SERVICE
Each use
Mower Blades
Check
Air Intake Screen
Check
Loose or Missing Hardware
Tighten or Replace
Belts
Check
Brake
Check
Engine Oil Level
Check
First 5 hours
Engine Oil and Filter
Replace
25 hours
Engine Oil**
Check
Air Filter
Clean
Transmission Cooling Fins
Clean
Axle & Spindle Bearings
Check for wear and grease (if necessary)
Steering Sector
Grease***
Brake
Check
50 hours
Engine Oil**
Replace
Engine Oil Filter
Replace
Transmission Oil
Check (see 'Maintenance” section)
100 hours Air Filter Element
Replace
Fuel Filter
Replace
Spark Plug(s)
Replace
Each Season
Linkages
Lube & adjust
Cables
Check/replace, adjust
Belts
Check/replace, adjust
Wheel Bearings
Grease***
Hood
Wax with auto wax
Front Axle Spindles
Grease***
Steering Sector
Grease***
‘Interval describes running time. This table describes service guidelines only. It does not provide
complete service information. Complete service is available from
“Consult engine owners manual for more detailed engine service your authorized dealer,
information.
***A hand-type grease gun is recommended when greasing the unit.
High-pressure type grease guns could cause damage to fittings/seals.
30