MTD Leaf Collection System User Manual

5
CONTENTS OF CARTON
42”/46” Leaf Collection System
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 1.
The hardware pack(s) included in this kit are detailed at the end of this section.
• Cart Collection Support Assembly - 689-02019
• Mesh Cover - 764-05215
• Bagger Chute - 731-09329A
• Bag Vent - 731-12351B
• Hose End - 731-12353A
• Hose - 764-05335
• Hardware Pack - 689-00636
50”/54” Leaf Collection System
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 2.
The hardware pack(s) included in this kit are detailed at the end of this section.
• Cart Collection Support Assembly - 689-02019
• Mesh Cover - 764-05215
• Bagger Chute Assembly - 819-010964
• Bag Vent - 731-12351B
• Hose End - 731-12353A
• Hose - 764-05335
• Hardware Pack - 689-02199
U-Shape Tube
Adjustment
Tube
Upright Tube
Corner Tube
Top/Bottom
Stop Plate
Center Stop
Plate
Bag Vent
Mount Tube
Figure 1
Upright Tube
Corner Tube
U-Shape Tube
Adjustment
Tube
Top/Bottom
Stop Plate
Center Stop
Plate
Bag Vent
Mount Tube
Figure 2
Thank You
Thank you for purchasing this product. It was carefully engineered to provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other persons who will
operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment, its features and
operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.
If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.
Throughout this manual, all references to
right and left side of the machine are observed from the operating position.

MTD Leaf Collection System Specifications

General

Brand	MTD
Model	Leaf Collection System
Category	Lawn Mower Accessories
Language	English

Summary

Contents of Carton

42/46 Inch Leaf Collection System Parts

Lists components for the 42/46 inch leaf collection system including support assembly, mesh cover, chute, bag vent, hose end, hose, and hardware pack.

50/54 Inch Leaf Collection System Parts

Lists components for the 50/54 inch leaf collection system including support assembly, mesh cover, chute assembly, bag vent, hose end, hose, and hardware pack.

Hardware Pack Details

Illustrates and quantifies hardware components for the 42/46 inch and 50/54 inch leaf collection system hardware packs.

Assembly and Installation Guide

Assemble Leaf Collection System Frame

Detailed steps for assembling the frame components, including corner tubes, upright tubes, and adjustment tubes, with diagrams.

Install Frame Assembly on Cart

Instructions for placing and securing the assembled leaf collection system frame onto the mower cart.

Install Boot and Hardware

Guidance on attaching the boot and associated hardware for both 42/46 inch and 50/54 inch models.

Install Bagger Chute

Steps for installing the bagger chute for the 42/46 inch mower deck models.

Install Bagger Chute for 50/54 Inch Models

Detailed instructions for attaching the bagger chute to the 50/54 inch mower deck.

Install Hose

Procedure for connecting the hose to the leaf collection system and mower.

Install Jackknife Plate Assembly

Steps for mounting and securing the jackknife plate assembly.

Operation of Leaf Collection System

Leaf Collection System Usage

Instructions on how to properly use the leaf collection system for gathering and emptying leaves/grass clippings.