MTI DoloMatte - MTI Commercial Warranty; Commercial Warranty Exclusions

Installation and Operational Manual • Designer Collection • Shower Systems
14 / mtibaths.com
This warranty is eective for all MTI Designer DoloMatte
TM
shower pans manufactured after May 1, 2021, and is in
lieu of all other warranties. MTI Baths, Inc. (MTI) provides a limited warranty for all DoloMatte
TM
shower pans for
use in the continental USA to the original purchaser for commercial, rental or multi-family application. Warranty
coverage begins from date of purchase (regardless of installation date).
MTI Commercial Warranty
TWOYEAR PARTS ONLY SHELL WARRANTY
MTI warrants the DoloMatte
TM
shower pan against defects in material and workmanship for a period of two years
from date of purchase. This warranty covers defective parts only. The pan must be water tested and installed per
our installation instructions. MTI reserves the right to inspect on site any malfunction or defect and determine an
appropriate course of action. MTI does not warrant leaks associated with improper waste and overflow installation
or damages to surrounding material associated with improper drain installation. Never leave a running shower
unattended. Blemishes, air holes or casting marks on the underside of the pan are not considered defects and do
not aect the performance or quality of the product.
RETURN OF WARRANTY CARD
The warranty registration card must be filled out by the purchaser within one hundred twenty days from purchase
and submitted to MTI Baths in order for this warranty to take eect. Warranty registration may be mailed or
completed online at mtibaths.com.
WARRANTY EXTENT AND LIMITATIONS
This warranty extends only to the original consumer/purchaser of the MTI Baths product when purchased
and originally installed within the boundaries of the continental USA. The warranty terminates after transfer of
ownership or if the tub is installed or relocated outside the boundaries of the continental USA* by the original
consumer/purchaser prior to the expiration of the warranty period.
Installation must be in an indoor, climate-controlled, commercial environment. The unit must be installed and
operated according to the manufacturer's instructions contained in the Installation and Owner's Manual.
Proper drain and valve installation is the responsibility of the installer. This product warranty does not cover
leaks associated with drain and valve installation or incidental or consequential damages/losses from any cause.
installation
WARRANTY EXCLUSIONS
This warranty excludes the following:
•
Any and all labor charges, removal or installation
expense or freight
•
Defects, damage or failure caused by common carrier,
installer, user or other persons
•
Display or floor model and overstock-sale units
•
Products classified as accessories such as, but not
limited to, valve and drain kits
This warranty shall be void due to any of the following:
•
Product modification
•
Improper installation care or maintenance
•
Failure to water or system test prior to final installation
•
Use of the product for any purpose or in any manner other
than that for which it is intended
CONTINUED ON NEXT PAGE...