MTS Systems Exceed 40 Series Site Preparation Guide

Moving E44 and E45(Standing position) Frames
MTS Exceed™ Series 40 Site Preparation Guide Lift and Move Instructions
37
The frame may overturn suddenly when lifting the frame.
An overturned frame can cause injury or death to anyone in the immediate
area.
Ensure that all persons in the immediate area are standing away from the
frame during lifting. Do not lift the frame more than 8 cm (3 in) off the floor.
4. Slowly and carefully lift the frame off the floor.
5. Move the frame to its operating location.
6. Slowly lower the frame to the floor.
7. Remove the shipping skid, insert the leveling wedge iron, and position the
frame. Follow the instructions described under “Crosshead method” on page
38.
When the frame is in its operating location, you can proceed with the installation
process.
Lifting the Frame from the Base
WARNING
Load Frame
Shipping Bolt
Shipping Skid
Forklift Arm

MTS Systems Exceed 40 Series Specifications

General

Brand	MTS Systems
Model	Exceed 40 Series
Category	Test Equipment
Language	English