MTU 10 V 2000 M84 User Manual

Operating Instructions
Diesel engine
8 V 2000 M84
10 V 2000 M84
MS150062/01E

MTU 10 V 2000 M84 Specifications

General

Brand	MTU
Model	10 V 2000 M84
Category	Engine
Language	English

Summary

Safety

General conditions

General information on safety regulations, correct use, modifications, spare parts, and reworking.

Safety regulations for startup and operation

Procedures and conditions for initial operation and operator safety during engine startup and operation.

Safety regulations for maintenance and repair work

Safety measures for qualified personnel during maintenance and repair, including special instructions.

General Information

Product description

Overview of the engine, fuel system, charging system, lube oil system, cooling system, and electronic system.

Engine layout

Diagram and list of engine components viewed from the free end (KGS).

Sensors, actuators and injectors – Overview

Top view diagram and table identifying sensors, actuators, and their monitored parameters.

Technical Data

8V 2000M84 engine data

Technical specifications for the 8V 2000M84 engine, including general and model-related data.

10V 2000 M84 engine data

Technical specifications for the 10V 2000 M84 engine, including general and model-related data.

Firing order

Table listing the firing order for different engine configurations (8V, 10V, 12V, 16V).

Operation

Putting the engine into operation after extended out-of-service periods (>3 months)

Preconditions and steps for re-commissioning the engine after long-term storage.

Checks prior to start-up

Detailed checklist of checks to be performed before starting the engine or system.

Starting the engine

Preconditions and points from which the engine can be started.

Stopping the engine

Preconditions and points from which the engine can be stopped.

Maintenance

Maintenance task reference table [QL1]

Reference table linking maintenance tasks to specific maintenance schedule entries.

Troubleshooting

Fuel treatment system – Troubleshooting

Troubleshooting guide for issues related to the fuel treatment system's illuminated pushbuttons and signal lamps.

Troubleshooting

Troubleshooting common engine issues like failure to turn, start, or reach nominal speed.

Task Description

Engine – Barring manually

Procedure for manually barring the engine using a barring tool and ratchet.

Cylinder liner – Endoscopic examination

Steps for performing an endoscopic examination of the cylinder liner.

Valve clearance – Check and adjustment

Procedure for checking and adjusting valve clearance at specific crankshaft positions.

Injector – Removal and installation

Detailed steps for removing and installing the injector.

Fuel filter – Replacement

Procedure for replacing the fuel filter element.

Engine oil – Change

Procedure for changing the engine oil, including extraction and filling with new oil.

Engine oil filter – Replacement

Procedure for replacing the engine oil filter.

Engine coolant – Level check

Procedures for checking engine coolant level at the filler neck or via the level sensor.

Engine coolant – Change

Procedure for changing the engine coolant.

Coolant filter – Replacement

Procedure for replacing the coolant filter.

Appendix A

Abbreviations

List of abbreviations used in the manual with their meanings and explanations.

MTU contacts/service partners

Information on MTU service, local support, 24h hotline, and spare parts service contacts.

Appendix B

Special Tools

List of special tools required for various tasks, with part numbers and usage references.