What to do if leak-off fuel level is too high in MTU 12 V 4000 M23F?
If the leak-off fuel level is too high in your MTU Engine, it suggests that the fuel lines are leaking. Check the fuel system and contact service for assistance.
What causes differential oil pressure too high at oil filter in MTU 12 V 4000 M23F?
If the differential oil pressure at the oil filter is too high in your MTU Engine, it indicates that the oil filter is not functioning correctly. Replace the oil filter.
What to do if differential oil pressure is too high at oil filter in MTU 12 V 4000 M23F?
If the differential oil pressure at the oil filter is too high in your MTU Engine, it indicates that the oil filter is not functioning correctly. Replace the oil filter and contact service for assistance.
What causes charge-air pressure too low in MTU 12 V 4000 M23F Engine?
If the charge-air pressure is too low in your MTU Engine, it could be due to: * A clogged air filter. Check the signal ring position of the service indicator. * A dirty intercooler. Contact service for assistance. * A defective exhaust turbocharger. Contact service for assistance.
What to do if MTU 12 V 4000 M23F Engine experiences overspeed?
If your MTU Engine experiences overspeed, it may be due to no fuel injection. Restart the engine, as the fault can possibly be eliminated by a restart. If the issue persists, contact service for assistance.
What causes speed of primary turbocharger too high in MTU 12 V 4000 M23F?
If the speed of the primary turbocharger is too high in your MTU Engine, it may be due to a clogged charge-air circuit or a fault in the turbocharger. Reduce power, check the air filter, and contact service for assistance.
What to do if speed of primary turbocharger is too high in MTU 12 V 4000 M23F Engine?
If the speed of the primary turbocharger is too high in your MTU Engine, it may be due to a clogged charge-air circuit or a fault in the turbocharger. Check the air filter and contact service for assistance.
What to do if my MTU 12 V 4000 M23F speed is not steady?
If your MTU Engine speed is unsteady, consider these potential causes: * A faulty fuel injector. Replace the injector. * A defective speed transmitter. Contact service for assistance. * A defective engine governor. Contact service for assistance.
What to do if my MTU 12 V 4000 M23F has black exhaust gas?
If your MTU Engine is emitting black exhaust gas, it could be due to: * A clogged air filter. Check the signal ring position of the service indicator. * A faulty fuel injector. Replace the injector. * Engine overload. Contact service for assistance.
What to do if my MTU 12 V 4000 M23F Engine turns on starting but does not fire?
If your MTU Engine turns on when starting but does not fire, it could be due to: * Poor rotation by the starter. Charge or replace the battery. * A low or faulty battery. Check the battery. * Defective engine cabling. Contact service for assistance.
General| Number of Cylinders | 12 |
|---|---|
| Bore | 170 mm |
| Stroke | 210 mm |
| Rated Speed | 1800 rpm |
| Engine Speed | 1800 rpm |
| Fuel Type | Diesel |
| Cooling System | Liquid-cooled |
| Engine Type | Four-stroke diesel engine |
| Displacement | 57.2 liters |
| Cylinder Arrangement | V-type |
| Emission Standards | IMO Tier II |
To Next Page