MTU 12V 2000 C66 - CDC Parameters - Reset with Diasys

6.19 Accessories for (Electronic) Engine Governor / Control
System
6.19.1 CDC parameters – Reset with DiaSys®
Preconditions
☑ Engine is stopped and starting disabled.
Resetting CDC parameters (DiaSys® is available)
Note: The CDC parameters must be reset, otherwise the emission certification of the engine is no longer appli‐
cable.
u Reset the CDC parameters with DiaSys® (→ Manufacturer's documentation).
Resetting CDC parameters (DiaSys® is not available)
Note: The CDC parameters must be reset, otherwise the emission certification of the engine is no longer appli‐
cable.
u Contact Service.
MS150094/01E 2012-08 | Task Description | 117
TIM-ID: 0000029731 - 002