MTU 12V 2000 C66 - Index

8.2 Index
A
After stopping the engine 33
Air filter
– Replacement 65
Auxiliary materials 11
B
Battery-charging generator drive
– Drive belt
– Replacement 98
Belt
– Drive
– Replacement 97
– Tension adjustment 96
– Tension check 95
C
CDC parameters
– Reset 117
Centrifugal oil filter
– Cleaning and filter sleeve replacement 72
Charge-air coolant
– Change 89
– Level check 88
Charge-air coolant
– Draining 92
– Filling 90
Charge-air coolant level
– Check 88
Charge-air coolant pump – Relief bore check 93
Checks
– Prior to start-up 25
Coalescer filter element
– Replacement 103
Connectors
– Cleaning 118
Contact persons 123
Coolant
– Change 89
– Charge-air
– Draining 92
– Filling 90
– Filling 82
– Filter
– Replacement 58
– Sample
– Extraction and analysis 85
Coolant - charge air
– Level check 88
Coolant filter
– Replacement 86
Coolant level
– Check 79
Crankcase breather
– Oil mist fine separator replacement 43
Cylinder
– Designation 16
Cylinder head cover
– Removal and installation 47
D
Data
– Engine 19
Differential pressure
– Pressure gauge
– Check 100
Dimensions
– Engine 17
Drain and vent points 74
Drive belt
– Condition check 94
– Replacement 97
– Tension check 95
Drive belt – Adjustment 96
E
Emergency stop
– Engine 32
Engine
– Barring manually 41
– Data 19
– Emergency stop 32
– Main dimensions 17
– Overview 14
– Start 28
– Stop 31
– Wiring check 109
– With starting system
– Barring 42
Engine coolant
– Change 80
– Filling 82
– Sample
– Extraction and analysis 85
Engine coolant level
– Check 79
Engine coolant pump – Relief bore check 84
Engine coolant – Draining 81
Engine governor
– Checking plug-in connections 108, 119
– Cleaning 118
– Installation 107
– Overview 105
– Removal 106
Engine oil
– Centrifugal oil filter – Cleaning and filter sleeve re‐
placement 72
– Change 70
– Filter
– Replacement 58
134 | Appendix B | MS150094/01E 2012-08
DCL-ID: 0000007590 - 003