MTU 16 V 2000 G25 TB User Manual

Operating Instructions
Diesel engine
12 V 2000 G25, G25 TB
12 V 2000 G45, G45 TB
12 V 2000 G65, G65 TB
12 V 2000 G85, G85 TB
16 V 2000 G25, G25 TB
16 V 2000 G45, G45 TB
16 V 2000 G65, G65 TB
16 V 2000 G85, G85 TB
18 V 2000 G25, G25 TB
18 V 2000 G45, G45 TB
18 V 2000 G65, G65 TB
18 V 2000 G85, G85 TB
Application group 3A
MS15018/02E

MTU 16 V 2000 G25 TB Specifications

General

Engine Type	Diesel
Fuel Type	Diesel
Turbocharged	Yes
Max RPM	1800 rpm
Cooling System	Water-cooled

Summary

1 Safety

1.1 Important provisions for all products

Key guidelines for safe product operation, maintenance, and repair.

1.2 Personnel and organizational requirements

Guidelines for qualified personnel, training, and protective equipment.

1.4 Safety regulations for startup and operation

Essential safety rules for engine startup, operation, and emergency stops.

1.5 Safety regulations for maintenance and repair work

Critical safety procedures for performing maintenance and repair tasks.

3 Technical Data

3.1 12/16/18 V 2000 Gx5 engine data, optimized fuel consumption

Detailed technical specifications for Gx5 engine models, focusing on fuel consumption.

3.2 12/16/18 V 2000 Gx5-TB engine data, optimized fuel consumption

Detailed technical specifications for Gx5-TB engine models, focusing on fuel consumption.

4 Operation

4.1 Putting the engine into operation after extended out-of-service periods (>3 months)

Steps to re-commission an engine after long-term storage.

4.2 Putting the engine into operation after scheduled out-of-service-period

Procedure for re-starting the engine after planned downtime.

4.3 Engine – Starting in manual mode (test run)

Detailed steps for starting the engine for testing purposes.

4.4 Safety system – Override

5 Maintenance

5.1 Maintenance task reference table [QL1]

A table referencing maintenance tasks and their corresponding procedures.

6 Troubleshooting

6.1 Fault indication on SAM display – Genset applications

Guides on interpreting fault messages from the SAM display in genset applications.

6.2 Troubleshooting

General guidance and common issues for troubleshooting engine problems.

7 Task Description

7.1 Engine

7.2 Cylinder Liner

7.5 Injection Pump / HP Pump

7.6 Injection Valve / Injector

7.7 Fuel System

7.8 Fuel Filter

7.13 Lube Oil System, Lube Oil Circuit

7.15 Coolant Circuit, General, High-Temperature Circuit