What to do if there are coolant leaks at the intercooler of MTU Engine?
If you observe coolant leaks at the intercooler of your MTU Engine, particularly with major coolant discharge, contact service.
Safety measures before, during, and after maintenance/repair tasks.
Reference conditions and power-related data for B26 F models.
Reference conditions and power data for B76 switchable models at 1500 rpm.
Reference conditions and power data for B76 models at 1800 rpm.
Reference conditions and power data for 12/16 V 2000 G16 F models.
Reference conditions and power data for 12/16/18 V 2000 G26 F models.
Reference conditions and power data for 12/16/18 V 2000 G76 F models.
Reference conditions and power data for 16 V 2000 G36 F model.
Steps for preparing engine startup after extended downtime.
Procedure for starting the engine, including safety precautions.
Checks and readings for monitoring engine operation and status.
Procedure for safely stopping the engine, including cool-down.
Procedure for initiating and handling an emergency engine stop.
Reference table for maintenance tasks and their associated page numbers.
Diagnosing and resolving common engine operational issues.
Procedure for manually cranking the engine using a barring tool.
Procedure for barring the engine using the starting system.
Procedure for checking and adjusting valve clearance.
Detailed steps for checking and adjusting valve clearance values.
Procedure for removing and installing the cylinder head cover.
Procedure for replacing an engine injector.
Detailed steps for removing and installing engine injectors.
Steps for removing engine injectors and sealing openings.
Installing injectors, including without/with press-in tool and pipe connections.
Tightening nuts for injector assembly and installing the fuel line.
Tightening fuel line nuts and connecting injector cable.
Procedure for replacing high-pressure fuel lines and pipe connections.
Tightening union nuts for fuel lines and pressure pipe connections.
Procedure for venting the fuel system to remove air.
Procedure for replacing the fuel filter element.
Checking and adjusting the differential pressure gauge on the fuel prefilter.
Procedure for draining water and contaminants from the fuel prefilter.
Procedure for replacing the fuel prefilter element.
Procedure for replacing the air filter element.
Steps for removing and installing the air filter assembly.
Procedure for disconnecting and removing the starter motor.
Procedure for installing the starter motor and electrical connections.
Procedure for checking engine oil level before and after operation.
Procedure for changing engine oil using different methods.
Procedure for replacing the engine oil filter.
Procedure for cleaning the centrifugal oil filter and replacing the sleeve.
Procedure for checking engine coolant level via filler neck or sensor.
Procedure for changing the engine coolant.
Procedure for draining engine coolant, including residual coolant.
Procedure for filling the engine with coolant, including safety notices.
Procedure for adjusting the tension of drive belts.
To Next Page
General