MTX RFL152 - Disassembly Procedure; Loosen Terminal Keps Nuts; Remove Spider Ring Screws; Remove Gasket Screws

SUPPLIED PARTS
A) RFLi52RCKCA- Replacement cone assembly
B) 9lT459- 5/32” Hex Key
C) 9TT460- l/8” Hex Key
D) 9lT464- Wrench
E) 26A407- 1 oz. glue pack
F) 192056- Spacer Paper
Q-E
DISASSEMBLY
1) Using supplied 9TT464 wrench, loosen (4) 9lT438 keps nuts holding
terminals to the basket. Remove 9TO205, 9T0206, and 9TO207 terminals,
(2) 9T0205PB terminal bases, and (4) 9lT438 nuts. Save parts for reas-
sembly.
Figure 1
2) Using supplied 9lT460 hex key, remove (6) 9lT445 screws
holding the spider ring to the basket. Save screws for reassembly
Figure 2
3) Using supplied 9lT460 hex key, remove (8) 9TT448 screws
holding the 460303 gasket to the basket. Remove gasket. Save
screws and gasket for reassembly.
Figure 3