Multi-Mover M18 - Preparation and Operator Requirements; Intended Applications and Limitations; Operator Training and Authorization

MULTI-MOVER M 9
3.22
Caution! Hazard of injury.
- maintenance and repair work may only be performed by a maintenance mechanic
who is recognized by Multi-Mover Europe BV.
- only original Multi-Mover Europe BV or CE certified parts may be used
in the Multi-Mover M.
3.23
As the operator you will determine the limits for "safe driving / working" with the Multi-Mover M.
Do not take any risks.
Be particularly careful in case of obstacles or uneven terrain.
4 PREPARATION
4.1 Application
The Multi-Mover M was developed for;
- moving trailers, caravans, trailers with or without goods, order picking, etc.
- driving over flat, dry, metalled or unmetalled terrain (e.g. warehouse, greenhouse, lawns etc.)
The Multi-Mover M is not suitable for transporting trailers with people.
The Multi-Mover M is not suitable for moving;
- goods containing toxic substances
- goods containing explosive substances
- goods containing hazardous substances
- combustible substances
- other liquids and hazardous substances than stated above
The Multi-Mover M does not have permission to be driven on public roads.
Only use the Multi-Mover M for the purpose for which it was designed.
For other applications, the CE mark does not apply.
The electric components and wiring have been made drip-proof (IP54). Therefore, the Multi-Mover
M must be covered in case of sprinkling or spraying plants. The Multi-Mover M must also be stored
on a dry location.
Only the following "original" “Multi-Mover Europe BV” parts and accessories may be used for the
Multi-Mover M.
Multi-Mover Europe BV is excluded from any liability for damages or consequential damages that are
caused by "original" parts that have not been supplied by us.
4.2 Operator
Only persons who have had a thorough (internal) theoretical and practical training for driving the
Multi-Mover M, are allowed to drive with the Multi-Mover M.
The training programme should cover: