Safety symbols
On various places on the Multi-Mover XL75 you will find standardized safety symbol stickers
as displayed to the right.
The upper part warns against a general or particular hazard.
The lower part indicates what type of hazard is being warned against and will explain what
you must do.
2 TECHNICAL DESCRIPTION
2.1 Designation, identification and description
Designation : MULTI-MOVER XL75
Identification : type plate on the encasing
Description : vehicle on two drive wheels and a swivel wheel
: suitable as towing device, optionally provided with an upward and downward mov-
ing coupling point, for instance, in order to couple the pole of a trailer and possibly to
lift it.
: drive while walking, by using the driving switches on the steering handle
Accessories
The following parts are delivered separately with the vehicle:
The vehicle's operation manual (online)
Battery loading report booklet (optional)
Manuals for possible options
2.2 Technical information and dimensions
__________________________________________________________________________
PUSH AND PULL FORCE 7,500 KG
- Weight 400-650 kg
- Length 168 cm
- Width 87 cm
- Height 100 cm
- Engine power 1500 watts 24 VDA, maintenance-free
- 2 x 12-volt 100 Ah batteries, maintenance-free, AGM lead acid
- Charger 24 volts 15A, external
- Push and Pull 7,500 kg, 4,500 newton horizontal traction
- Solid-rubber tyres Continental SC20: 12 cm wide, 6-inch rims
- Solid-rubber double wheel castor, ∅ 200 mm
- Ergonomic tiller head with emergency stop, belly button
- Potentiometer for continuously adjustable maximum speed to 5 km/h
- Tiller head can fold together
- Gross axle weight 650 kg
- Battery, hour and error display
- Lock with 2 keys
To Next Page
Loading...