- Horn
- Minimum speed is 0.1 km/h
- Emergency stop switch on the housing
- Bolt or tow bar coupling
- Front double M12 thread to 20, 30, 40 and 50 cm height for couplings
- Work area: 6 to 8 km
- Operating time: 3-4 workdays
Always supplied with 2 batteries (in the drive box), external charger and coupling. There are many
options to choose from.
2.3 Packaging, loading / unloading, towing, recycling
Packaging
The Multi-Mover XL75 is secured with straps on support beams on a pallet, surrounded by a protec-
tive cardboard box.
Removing the packaging
Remove the clamping strips at the wheels.
Avoid injury and damage as a result of incorrect placement of the lift truck's lift forks.
Loading and unloading
If the Multi-Mover XL75 has to be moved by means of a lift truck, the lift forks must be placed at the
heaviest part at the rear of the Multi-Mover XL75, between the 2 large wheels.
Recycling of the packaging
Save the packaging for possible future transportations.
If you want to remove the packaging, you must observe the local and national regulations concerning
plastic waste processing.
To Next Page
Loading...