Multi PSI Multi-160 - Operating Instructions

10 | Droit d’auteur Multi PSI. Toutes les informations contenues dans ce document sont sujettes à
modification sans préavis. Copyright Multi PSI. All information contained herein is subject to change
without notice.
Operating instruction
Before use the Multi-160 spray gun, material preparation is the first stage:
Please refer to the thinning chart and picture.
Material Run out Time (seconde)
Multi BioLab Disinfectant
No thinning required
Oil enamel
25-60
Oil based primer
30-60
Oil stain
No thinning required
Clear sealer
No thinning required
Polyurethane
No thinning required
Varnish
20-60
Lacquer sanding sealer
25-35
Lacquer
25-35
Automotive finishes
20-40
Latex
45-90
1. Unscrew the container from the Multi-160 spray gun.